If your water filter is located on the bottom left of the appliance, follow the steps below or watch the video.
1. Open your new water filter and remove any plastic wrap. If your new filter is packaged with a cap, make sure to remove it.
2. Remove the old filter by turning the cap counter-clockwise. Take the filter out.
3. Remove the cap located at the bottom of the old filter and place it on the bottom of the new filter.
4. Insert the new filter (with cap attached) by sliding it in and rotating clockwise.
Additional tips for UltraClarity water filters (REPLFLTR10, REPLFLTR30)
- If the filter does not easily slide in, rotate it clockwise while pushing it in.
- If the cap sticks out, lift the filter up (while it’s inserted) and rotate clockwise while pushing in.
5. Align the cap with the raised lines on the refrigerator/freezer.
6. Discard the ice cubes produced during the first 24 hours. If your appliance has a water dispenser, dispense water for 5 minutes and then discard.